POST DRIVERS & AUGERS

The HPD-16/22Q models with manual adjust quickly delivers a tight post set for wood or steel posts. Base model offers manual adjustment cranks and bubble level for perfect vertical alignment on flatland or hillsides. Transport lock pin secures unit for travel and storage. Greaseable pivot points provide reliable movement of the driver.

Driving post along existing fence lines, ditch banks, or corners is easily done with a SWO model. Hydraulic side shift extends the unit 24” to the left permitting the post driver to reach up to 46” left of the tractors center point. Heavy-duty 3-angle swivel mount pivots the driver 45°, 90° or rear facing for increased versatility. Slide tension adjusters provide easy extension of the unit, while providing support when extended. Two trailer hitch locations are standard.

Save time by simplifying driver installation and removal with a self-contained hydraulic post driver. These skid steer post drivers feature their own hydraulic pump, motor and reservoir. No special return line fittings are required with these units. Gear pump is used to move the oil within the self-contained system providing reliable operation. Note: Some skid steer models require the Self-contained post driver

Want greater multi-task performance from your skid loader? Then connect it to a hydraulic skid steer mounted post driver. The HPD-16 & HPD-22Q are offered either with manual crank adjustment (MSS) or hydraulic adjustment (HSS) for quicker productivity. The model HPD-26Q HSS is all hydraulic adjust with 3” x 6” cylinders, all feature the Big-foot stabilizer for improved stability and operating performance. This combination makes transport simple, enables maneuverability into areas not accessible with a tractor while increasing operator productivity and skid steer versatility.

Designed and engineered for those who have serious fencing to do. These center mounted units offer all the quality features of the basic HPD-16 & HPD-22Q plus effortless hydraulic driver alignment controlled by two 3” x 6” hydraulic cylinders. For increased driving force, the heavyduty HPD-26Q SHC delivers 110,000 lbs. of high-impact force for driving large posts in tough soil conditions. Big-foot stabilizer helps control tractor bounce on these larger units.

The Renegade is Wheatheart’s popular model. The trailer mounted post pounder offers the convenience of towing posts with you as you work. The telescoping hitch, telescoping mast and four-way tilt direction provide the flexibility of working on uneven surfaces, allowing you to pound posts exactly where they need to be.| Renegade mast raises up to 11' 11" with 660 lbs of hammer pressure| Renegade mast raises up to 14' 6" with 720 lbs of hammer pressure| Bolt on hammerhead with several mounting positions to accommodate different post heights| Greaseless poly slides are low maintenance | Built-in trailer to hold and transport posts with the unit| Standard, hydraulic post hugger

The Outlaw is the most versatile three-point hitch model made by Wheatheart. The free-standing unit features a telescoping mast and tilt functions that allow you take this unit anywhere a tractor can go, including side hills, and the adjustable hammer head gives you the flexibility of using different post lengths.| Outlaw mast height adjusts from 9' 6" to 11' 11" with 660 lbs of hammer pressure| Outlaw mast adjusts from 9' 8" to 14' 5" with 720 lbs of hammer pressure| Bolt on hammerhead with several mounting positions to accommodate different post heights| Greaseless poly slides are low maintenance and worry-free| Low center of gravity and wide stance for added strength and stability| Standard, hydraulic post hugger
| Optional FeauturesCast iron cones, square and T-post huggers, depending on your needsThe optional pilot auger allows to drill most soil conditions and certain rock obstructions, making it easier to pound posts

6-15 GPM 1500 ft/lb

MODEL NC-150 ORDER NUMBER 113025 Maximum Output Torque 1419 ft/lb Recommended Fluid Flow 6-15 gpm Maximum Pressure-Continuous 3000 psi Recommended Max Auger Dia-Dirt 18 in

AUGER

– EXTREME DUTY SERIES 2

Blue Diamond® Extreme Duty Series 2 Auger offers the ultimate in performance, quality, and cost-effectiveness.

Designed with high-grade materials and innovation, this design allows the gearbox to go down the hole, maximizing drilling depth while eliminating downtime. The Blue Diamond® Extreme Duty Auger Series 2 drives are perfect for drilling and augering in most ground conditions.

Features Include: Compact high torque manufactured gearbox 2 piece shaft design ensuring maximum side load ratings

5-yr gearbox warranty, 3-yr motor warranty, and lifetime shaft pull-out warranty